How Can You Conserve Energy When Using Commercial Dishwashers

Do you have a business that requires you to use commercial dishwashers? If you do, then you need to know how you can save energy. These dishwashers can use a lot of excess energy that will end up costing you money, you do not need. Know how to save energy can also help you save money.

Here are the main things that can be done to help any business save money with dishwashers.

1. Always train your employees to never start a load of dishes until the rack is full. Wash only half a load using a lot of energy, so it makes sense to wait until it is full before you spend so much energy.

2. It is important that you check the water temperature. You can get a dishwasher thermometer to help you control it. It is a good idea to check it during the rinse cycle on a regular basis.

This is really important for high temperature, slices, because you want to be sure that the temperature is 180 degrees Fahrenheit for each cycle. This can help you save energy because you can adjust the water temperature to be sure that it does not run too cold or too hot, but at 180 degrees at all times.

3. Did you know that you can adjust the water temperature on your water heater to ensure you are minimizing waste of water? It does not matter if you have a booster water heater, can commercial water heater or even a single tank water heater, all these adjusted. You want to keep the temperature of the water heater because you use it more, the water temp change, so you'll have to adjust it as it happens.

4. Get in the habit at night to turn off the tank heaters and booster heaters. These units will keep the warm water overnight, and it will waste very little energy. If you turn them off at night and again tomorrow, then you will be able to save a lot of energy instead.

5. Always check the water pressure on a regular basis. If it says you are more than 25 pounds per square inch or PSI, it means that you are wasting energy by using too much water. Most dishwashers use only 20 PSI. It is always a good idea to check with the manufacturer to find out what the best PSI are, and then adjust it accordingly.

These are the main things you can do to help you save energy when you use commercial dishwashers. There are other things you can do to save energy that you can learn with a little research. The smart thing to do is get in the habit of doing these things, and others that you learn to be sure you save money every month, instead of using what you do not.